- 51001/products/SLR-LID-2S.htmSLR-LID SeriesProduct Disclaimer: DISPENSE-RITE SLR-LID-2 Series Lid Dispensers are primarily intended for use with flat, cold beverage lids. Lids that are tightly nested or have deep extrusions may not be compatible. To confirm lid compatibility please contact a DISPENSE-RITE representative and provide a full sleeve of lids for testing prior to ordering.Lid rim diameters: 3" to 4-5/8"7-1/8" Dia. X 18" LABS plasticUSA108.006812483016689187524" L x 18" W x 24" H8124830195058" L x 8" W x 24" H8 oz. to 44 oz. lidsLid Dispenser, in-counter, holds 8 oz. to 44 oz. lids, rim dia. 3" - 4-5/8", ring bezel 7-1/8", cut-out 5-1/4", 19" under-counter length, ABS plastic construction, for use primarily with flat cold beverage lids (lids that nest tightly or have deep extrusions may not be compatible), NSF8 oz. to 44 oz. lidsNo adjustment required; easy one handed dispensing operationAll parts are easily removable for simple cleaningIntegrated mounting collar fully supports dispenser from front of counterNSF listed60.89SLR-LID-2SLid rim diameters: 3" to 4-5/8"In-counter lid dispenser - 17" LSLR-LID-2S In-counter lid dispenserDISPENSE-RITE SLR-LID-2 Series lid dispensers are designed to combine simplicity with dependability for long-term reliability and maximum cost savings. Lid stacks are enclosed to protect from potential contamination due to spills, splashes and sneezes. This sanitary beverage lid dispenser requires no adjustment and is available for a variety of in-counter and countertop applications. This unit is designed to accommodate a variety of 8 oz. to 44 oz. lids (see disclaimer) with rim diameters ranging in size from 3"– 4 5/8". The SLR-LID-2 models require a 5 1/4" hole cut-out. Dispenser has a standard under-counter length of 22". All parts are easily removable for simple cleaning. All models are NSF Listed. Product Disclaimer: DISPENSE-RITE SLR-LID-2 Series Lid Dispensers are primarily intended for use with flat, cold beverage lids. Lids that are tightly nested or have deep extrusions may not be compatible. To confirm lid compatibility please contact a DISPENSE-RITE representative and provide a full sleeve of lids for testing prior to ordering.In-Counter ABS plastic lid dispenser - 17" Length1105SLR-LID-2S | DISPENSE-RITEConstruction material
- ABS plastic
Cup or lid size- 8 oz. to 44 oz.
Dispensing mechanismHousing typeMounting application- In-counter
Napkin foldNapkin sizeNumber of accessory compartments- None
Number of cup or lid dispensers- 1
Product category- Lid Organizers
Product family- SLR-LID Series
Products dispensed- Lids
Symbols- NSF
- One-Size-Fits-All
- USA
02019-10-23T11:39:32.58300- 5100SLR-LID-2S/products/SLR-LID-2S.htmIn-Counter ABS plastic lid dispenser - 17" Length
SLR-LID-2S In-counter lid dispenser
Click image to enlarge
In-Counter ABS plastic lid dispenser - 17" Length
8 oz. to 44 oz. lids
No adjustment required; easy one handed dispensing operation
All parts are easily removable for simple cleaning
Integrated mounting collar fully supports dispenser from front of counter
NSF listed
Lid rim diameters: 3" to 4-5/8"
Note:Product Disclaimer: DISPENSE-RITE SLR-LID-2 Series Lid Dispensers are primarily intended for use with flat, cold beverage lids. Lids that are tightly nested or have deep extrusions may not be compatible. To confirm lid compatibility please contact a DISPENSE-RITE representative and provide a full sleeve of lids for testing prior to ordering.
Product Overview
DISPENSE-RITE SLR-LID-2 Series lid dispensers are designed to combine simplicity with dependability for long-term reliability and maximum cost savings. Lid stacks are enclosed to protect from potential contamination due to spills, splashes and sneezes. This sanitary beverage lid dispenser requires no adjustment and is available for a variety of in-counter and countertop applications. This unit is designed to accommodate a variety of 8 oz. to 44 oz. lids (see disclaimer) with rim diameters ranging in size from 3"– 4 5/8". The SLR-LID-2 models require a 5 1/4" hole cut-out. Dispenser has a standard under-counter length of 22". All parts are easily removable for simple cleaning. All models are NSF Listed. Product Disclaimer: DISPENSE-RITE SLR-LID-2 Series Lid Dispensers are primarily intended for use with flat, cold beverage lids. Lids that are tightly nested or have deep extrusions may not be compatible. To confirm lid compatibility please contact a DISPENSE-RITE representative and provide a full sleeve of lids for testing prior to ordering.
Product Specifications
Model #:
SLR-LID-2S
Product Family:
SLR-LID Series
Product Description:
In-Counter ABS plastic lid dispenser - 17" Length
Product Dimensions:
7-1/8" Dia. X 18" L
Accommodates:
8 oz. to 44 oz. lids
Other Specifications:
Lid Dispenser, in-counter, holds 8 oz. to 44 oz. lids, rim dia. 3" - 4-5/8", ring bezel 7-1/8", cut-out 5-1/4", 19" under-counter length, ABS plastic construction, for use primarily with flat cold beverage lids (lids that nest tightly or have deep extrusions may not be compatible), NSF
Construction Material:
ABS plastic
Country of Origin:
USA
Certifications:
NSF, One-Size-Fits-All, USA,
Packaging Specifications
Case Quantity:
6
UPC Master Case:
812483016689
Master Carton Dimensions:
24" L x 18" W x 24" H
Master Carton Cubic Feet :
6
Physical Case Weight:
18
UPS/FedEx Dimensional Case Weight:
75
UPC Individual Carton:
812483019505
Individual Carton Dimensions:
8" L x 8" W x 24" H
Individual Carton Cubic Feet:
0.89
Accessories
Surface-mount undercounter mounting bracket for (1) STL-2, SLR-2, ADJ-2 or BFL-2 cup dispenser or SLR-LID-2 lid dispenser - Black Polystryrene
Accommodates: (1) STL-2, SLR-2, ADJ-2 or BFL-2 cup dispenser or SLR-LID-2 lid dispenser
Surface-mount undercounter mounting bracket for (2) STL-2, SLR-2, ADJ-2 or BFL-2 cup dispensers or SLR-LID-2 lid dispensers - Black Polystryrene
Accommodates: (2) STL-2, SLR-2, ADJ-2 or BFL-2 cup dispensers or SLR-LID-2 lid dispensers
Surface-mount undercounter mounting bracket for (3) STL-2, SLR-2, ADJ-2 or BFL-2 cup dispensers or SLR-LID-2 lid dispensers - Black Polystryrene
Accommodates: (3) STL-2, SLR-2, ADJ-2 or BFL-2 cup dispensers or SLR-LID-2 lid dispensers
How can we improve the information on this page?
Is an important specification missing? Did you spot an error? Please let us know how we can make this information useful to you.